TB-FMCH-3GSDI

Bring Broadcast Quality SDI Video to Your FPGA Design

Features

• 4 bidirectional channels of triple rate SDI(Serial Digital Interface)
  • Samtec DIN 1.0/2.3 75 Ohm connectors
  • FPGA selectable input/output direction on each channel
  • Incorporates National Semiconductor LMH03873 Gbps HD/SD SDI configurable I/O with Integral Adaptive Cable Equalizer / Cable Driver
    • SMPTE (Society of Motion Picture and Television Engineers) 424M compliant
    • SMPTE 292M compliant (SD-SDI)
    • SMPTE 344M compliant (ED-SDI)
    • SMPTE 259M compliant (HD-SDI)
    • Supports DVB-ASI (Digital Video Broadcasting — Asynchronous Serial Interface) at 270 Mbps
    • Data rates: 125 Mbps to 2.97 when receiving and DC to 2.97 when driving cable
    • Equalizes up to 120 meters of Belden 1694A at 2.97 Gbps, up to 200 meters of Belden 1694A at 1.485 Gbps, or up to 400 meters of Belden 1694A at 270 Mbps
• Reference clock input for sync (PLL cleaned)
• Bottom-side HPC (high pin count) FMC (FPGA Mezzanine Card) connector interface to carrier board
• Top-side HPC used to stack second TB-FMCH-3GSDI card (for 8-ch of triple rate SDI!)

References

User Guide

• Email Request

Technical Support

Support in North America for this product is provided by Aspen Logic. Support for third party hardware and/or software and/or IP is provided through the third party (such as Xilinx) and not by us.

Please open a ticket, call us at 303|800|5859 or email us (inrevium@aspenlogic.com) with your technical support issue or question.

Please be advised that Aspen Logic, Inc. hereby disclaims any And all warranties, express or implied, including warranties of merchantability, fitness for a particular purpose, or non-infringement with respect to any such products, information and/or services it provides.

Tokyo Electron Device Ltd. warrants its products for two weeks from the date of purchase.