TB-FMCL-HDMI (rev 3)

HDMI 1.3 Interface FPGA Mezzanine Card (FMC)

Features

• HDMI 1.3 Encoder (Non-HDCP)
  
• HDMI 1.3 Decoder (Non-HDCP)
• FMC Low Pin Count connector w/ RGB (10-bit) + HSync + VSync + Data Enable interfaces (RX && TX) to carrier card
• Power supplied either by external supply or through FMC connector +12V and +3.3V from carrier card
• UART Interface
• I2C EEPROM Interface
• JTAG Interface for programming the Spartan 3AN
• Selectable encoder HSYNC, VSYNC polarity levels (both normal, both inverted)
• EDID signal can be connected directly from receive connector to transmit connector without EEPROM (new in rev 3)
  

Key Components

• Spartan-3AN used as a data formatter (XC3S400AN-5FGG400 datasheet)
• 10-Bit Integrated, Multiformat SDTV/HDTV Video Decoder, RGB Graphics Digitizer, and 2:1 Multiplexed HDMI/DVI Interface ADV7441A datasheet
• Deep Color HDMI 1.3 Transmitter with CEC (ADV7510 datasheet)
• Decoder Circuit EEPROM to implement Monitor Identification (24LCS22A-SN datasheet)
  

References

General

• Block Diagram
• User Guide (Email Request)

Schematic

• Email Request

Logic Design

Articles

Reference Designs

Technical Support

Support in North America for this product is provided by Aspen Logic. (Support for third party hardware and/or software and/or IP is provided through the third party (such as Xilinx) and not by us.)

Please open a ticket with your technical support issue or question or call us at 303|800|5859.

Please be advised that Aspen Logic, Inc. hereby disclaims any warranties, express or implied, including warranties of merchantability, fitness for a particular purpose, or noninfringement with respect to any such products and/or services. Tokyo Electron Device Ltd. warrants its products for two weeks from the date of purchase.